Blaupunkt Napa65 Wiring Diagram Full _verified_ -

| Pin | Wire Color | Function | Details | |------|------------|-----------------------------|---------------------------------------------| | 1 | Yellow | | Keeps clock, presets, and EQ settings saved. Connect directly to always-on +12V. | | 2 | Blue | Power Antenna / Amp Remote | Switched 12V output (max 300mA) when the unit is on. Use for electric antennas or turning on an external amp. | | 3 | Black | Ground (GND) | Chassis ground. Connect to bare metal of the car’s dashboard frame. Do not skip this. | | 4 | Red | Accessory (12V Switched / Ignition) | Turns the radio on/off with the key. Connect to a circuit that has +12V only when the car is in ACC/ON position. | | 5 | Green/Black | Left Rear Speaker (-) | Negative terminal for the rear left channel. | | 6 | Green | Left Rear Speaker (+) | Positive terminal for the rear left channel. | | 7 | White/Black | Left Front Speaker (-) | Negative terminal for the front left channel. | | 8 | White | Left Front Speaker (+) | Positive terminal for the front left channel. | | 9 | Purple | Right Rear Speaker (+) | Positive terminal for the rear right channel. | | 10 | Purple/Black | Right Rear Speaker (-) | Negative terminal for the rear right channel. | | 11 | Gray | Right Front Speaker (+) | Positive terminal for the front right channel. | | 12 | Gray/Black | Right Front Speaker (-) | Negative terminal for the front right channel. | | 13 | Brown | Mute (Tel Mute) | When grounded (e.g., by a hands-free kit), the radio mutes the audio. Often left unconnected. | | 14 | Orange/White | Illumination (Dimmer) | Connects to car’s lighting circuit. Dims the display when headlights are on. (Note: On some NAPA65 units, this is not used or is optional). | | 15 | N/A | Not connected | Leave empty. | | 16 | N/A | Not connected | Leave empty. |