H-ig41-uatx Rev 1.1 Manual ((hot)) -

Chipset: Intel G41 Express / Intel ICH7Form Factor: Micro-ATX (uATX)CPU Socket: LGA 775 (Socket T)Front Side Bus (FSB) Support: 800 / 1066 / 1333 MHzMemory Slots: 2 x 240-pin DDR3 DIMMExpansion Slots: 1 x PCIe x16, 2 x PCIe x1, 1 x PCIStorage: 4 x SATA II (3.0 Gb/s) connectors Processor Support

Supports up to (depending on specific BIOS version). Speeds: PC3-8500 (1066 MHz) or PC3-10600 (1333 MHz). Graphics: Integrated Intel GMA X4500. Expansion: 1x PCI Express x16 (for dedicated GPU). 2x PCI Express x1. 1x PCI slot. 🔌 Front Panel Jumper Settings h-ig41-uatx rev 1.1 manual

Connecting a non-HP case to this board can be tricky because the headers are often proprietary. The main front panel header is a 9-pin connector Chipset: Intel G41 Express / Intel ICH7Form Factor:

Before purchasing parts, refer to these specifications to ensure compatibility. Expansion: 1x PCI Express x16 (for dedicated GPU)

Rev 1.0 used DDR2 memory, while Rev 1.1 uses DDR3. The pinout for the front panel also changed. Always use the Rev 1.1-specific manual.

| Feature | Specification | | :--- | :--- | | | Micro-ATX (uATX) – Approx. 9.6" x 8.5" (24.4 cm x 21.6 cm) | | CPU Socket | LGA 775 | | Supported CPUs | Intel Core 2 Quad, Core 2 Duo, Pentium Dual-Core, Celeron (FSB 1333/1066/800 MHz) | | Chipset | Northbridge: Intel G41, Southbridge: Intel ICH7 | | Memory | 2 x DDR3 DIMM slots (max 8 GB , DDR3-1066/1333 non-ECC, unbuffered) | | Integrated Graphics | Intel GMA X4500 (VGA and DVI-D outputs) | | Expansion Slots | 1 x PCIe x16 (v1.1) 1 x PCIe x1 2 x PCI | | Storage | 4 x SATA 2.0 (3 Gbps) 1 x IDE (PATA) – often via an ITE or JMicron chip | | Audio | Realtek ALC662/ALC888S – 5.1 or 6-channel HD Audio | | LAN | Realtek RTL8105E / RTL8111 – 10/100/1000 Mbps (model dependent) | | Rear I/O | PS/2 keyboard, PS/2 mouse, VGA, DVI-D, 4 x USB 2.0, LAN, 3 audio jacks | | Internal headers | 2 x USB 2.0 (4 ports), 1 x front audio, 1 x COM (serial), 1 x S/PDIF, 1 x chassis fan, 1 x CPU fan (4-pin PWM) |