Test Point Driver Huawei Install _hot_ ⇒ ❲PLUS❳

Once installed, you must verify that the driver is working correctly. Open your Device Manager and look under the section. You should see: 📍 Huawei USB COM 1.0 (COMxx)

Power off the device completely. Remove the SIM tray. Using a heat gun or iOpener, heat the back cover to soften the adhesive. Gently pry open the cover using a plastic guitar pick. test point driver huawei install

With the driver installed, you can now flash the phone. Once installed, you must verify that the driver

Extract the Test Point Driver files from the zip file and run the installation executable. Follow the on-screen instructions to install the driver. Remove the SIM tray

A: That means the phone is in normal ADB mode, not test point mode. You failed to short the pins correctly during the USB connection. Try again.